Artasid.7612

Still no changes to lw3 leylines. They still drain the endurance bar from Skyscales, but refill the endurance bar on Griffons. Why so much hate on the Skyscale?

It seems that whenever the camera rotates or moves whenever there is a nearby source of water in the new Inner Nayos map area, the water graphics glitch and flash and sometimes they do give me headaches. I have a friend who also plays who was having similar issues about the water graphics. I am concerned that these graphic issues may trigger seizures in others that may have photosensitivity, and I do wish this is addressed as soon as possible. Thank you. EDIT: It has been brought to my attention that by changing the Shader Options (in the graphics settings) from Low to Medium does resolve this problem.

It is now 1 month and 1 day since this thread had been posted and I have yet to see anything to indicate that the LW3 laylines issue have even been looked at let alone addressed. To Recap. If you have the Rising Spirits mastery unlocked, your endurance bar on both your Griffon and Skyscale should refill as you ride over a layline. However, in all LW3 maps, only the Griffons endurance bar refills while the Skyscales bar Drains instead. This is making it difficult to use a Skyscale in LW3 maps for further exploration and zone reaching.

UPDATE: After the patch update on 9/28/2023, it appears that the Ley lines in LW3 or HoT maps do Not drain the endurance bar while riding on a Griffon. Rising Spirits seem to function just fine while on that mount, However, the Skyscales endurace bar still gets drained while in a ley line outside of the SotO maps.

No, it is an actual Drain. Even when you are decending while in a ley line, the endurance bar does not refill like it should and numerous times the bar goes completely red, stopping your ability to stay aloft and defeating the whole purpose of the leyline. As far as I know, the leylines were tested and this effect was not current during the release week of SotO. This bug did not start until around the 20th or so.

I have just tested this with some guildies and apparently EVERY ley line in HoT and LW3 maps drain endurance instead of filling.

I have unlocked the mastery trait "Raising Spirits" from the SotO Flight Training line which states "Your flying mounts now gain flight endurance from updrafts and ley lines." However, whenever I use the ley lines in Ember Bay, specifically the two that run between Promontory Waypoint and Ivy's Circus Spectacular, the endurance of my mounts, both Skyscale and Griffon, get drained and I end up descending from the ley line about half way through with a red endurance bar. I'm pretty sure this is not how the mastery is supposed to react, so I do hope this is just a bad glitch.

There is a similar event with similar bugs at Daigo Ward, Literally on top of the Daigo Ward Waypoint. The Oni will attack anyone that comes to the WP, and roams the area but we are not able to target it or cause any form of damage (As far as I know)

Disregard my last post. I have since discovered that once I cleared my cache, the gemstore worked normally. For those that may not know how, here's how to do it. This is taken from the Trobleshooting Trading Post support thread Completely close the game. Hold down the Windows and R key to open the Run prompt. Type %temp% in the box that appears and click OK. Find any folders named "gw2cache-(code)" and delete them. Example: gw2cache-(50641E0B-3AD4-1601-081E-6450D43A0116) Re-launch the game.

I am bumping this topic because since the SAB patch, I have been having similar issues as with Iyatil.7580. I am not able to access the Gem store. The window stays blank with no way to select any of the catagories. However, the Currency Exchange and Trading Post function just like normal. I hope this is a quick fix because being unable to use my gems that I paid for is a bit upsetting.

Correct me if I'm wrong, but didn't Arena Net indicate that on November 28 there would be a patch update meant to fix this issue? Here it is 11/28 and I'm not seeing any kind of update at all. *Actually I stand corrected. It is 11/29th that the patches are due, not the 28th. My mistake

Posting to bump this thread. As of October 30 2022, the Elementalist Evasive Arcana skill for the Fire Attunement is STILL broken. I read in various other forums and from in game chat that the Oct 28th patch was supposed to fix this issue. It has not. Because of this, I am unable to enjoy my elementalist characters as are many others. Anet, PLEASE expedite this bug fix.

I don't know if its related, but since I got my Jade Bot mini, it seems every time I have it out, my system lags and I noticed that the gameplay lags even worse where there are a bunch of the Jade Bot minis in a small area (Like the Thousand Seas Previlon). I'm almost convinced the coding for the mini's animations and sounds are off and this is what is causing the lag. Of course, I could be completely mistaken, it's just something I noticed when a lot of mini jade bots are around, but when there are none around there does not seem to be an issue.

I can confirm that the October 4th balance patch for GW2 had NOT corrected the fire attunement Evasive Arcana skill. It still does not trigger regardless of how many dodges you make. Anet, PLEASE look into this, the lack of a Flame Burst is limiting my enjoyment with my Elemetnalists.

I am also having the same difficulty with the Fire attunement Evasive Arcana on all of my Ele's as well. Which really hurts my playstyle because I normally lead a battle by dodging into a group of mobs so the Flame Burst triggers and applies Burning to as many targets as possible as soon as possible, but with it not triggering, I have to alter my rotations and it's a lot harder than it sounds. I TRUELY hope Anet is aware of this and addresses the issue.

Can we confirm whether or not this new upcoming patch will address the issue of character models not loading up? Because as far as I know, it's only to tweek the EoD Dragon's End meta. I hate to echo what most others in this thread have said already, but Anet is really starting to disappoint me by allowing this bug to interfere with gameplay for as long as it has.

I sent a ticket to anet and I was instructed to try to open the Launcher as Admin, but to also open it in Compatibilty mode. I have tried both of these and there has been NO improvement.

It also effects my character selection screen, the larger window with the Cantha background remains black, my character models do not load, even in the icon windows at the bottom. And when I do select a character the loading screen and the map icons (HP's, vistas, pois ect) also do not load. I have restarted my PC and even restarted my internet modem, but there has been no change sadly. I have submitted a bug report in game and even submitted a ticket. I really am hoping this gets resolved soon

Since the recent patch update on 3/29/2022 I and many others have had issues regarding our games. When we log in, not only does it take a longer time than normal, but our characters, skills, inventory and map do not load properly, or sometimes not at all. I do not use the DX11 beta, and neither do some of the others that have mentioned of having this same issue. I hope this is addressed soon.

Since late December of 2021, it seems that every time I use the Jackal mount's ability to go through sand portals (Especially in the Desolation map area), immediately after I pass through, I get disconnected from the game and I get a "Network Error" message even though my network retains a solid connection, and I have to restart my game session. I'm curious if this is a common occurrence to other players as well because this is becoming a frustrating inconvenience during gameplay.

Starting GW2 in Compatibility Mode so far is the better solution in my case.

I found that putting the GW2 in Compatibility Mode for Windows 8 has worked for me. I have also tried several of the various other suggested solutions, but this compatibility mode seems to be the only one that works for me. Thank you baxyp.2495