mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 -usecoherent now says make sure you have dx9 and an updated video driver it worked before 1 Link to comment Share on other sites More sharing options...
ArtExplosion.5806 Posted April 18, 2023 Share Posted April 18, 2023 2 minutes ago, Chaba.5410 said: Is that CEF failing to connect? I bet there's a log somewhere for it. Maybe you have a firewall blocking the connection? Idk what that means sry i just got error code Erorr code 3044:1030:9:553 but then i searched for it, i dont found it in the list Link to comment Share on other sites More sharing options...
Chaba.5410 Posted April 18, 2023 Share Posted April 18, 2023 1 minute ago, mezzer.4096 said: -usecoherent now says make sure you have dx9 and an updated video driver it worked before This patch removed DX9 from the graphics options. You probably have to also add -dx9 to the command line, assuming that wasn't removed. Link to comment Share on other sites More sharing options...
mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 updated video drivers and still says unable to initialize 3D output Link to comment Share on other sites More sharing options...
Chaba.5410 Posted April 18, 2023 Share Posted April 18, 2023 2 minutes ago, ArtExplosion.5806 said: Idk what that means sry i just got error code Erorr code 3044:1030:9:553 but then i searched for it, i dont found it in the list That error code has been associated with some network connection problem specifically with the Chromium Embedded Framework from the last time they tried to replace Coherent. That subsystem is trying to make a network connection and failing for some reason. Not clear why. CEF (and Coherent) are separate processes from GW2 that run on your system. Link to comment Share on other sites More sharing options...
ArtExplosion.5806 Posted April 18, 2023 Share Posted April 18, 2023 Just now, Chaba.5410 said: That error code has been associated with some network connection problem specifically with the Chromium Embedded Framework from the last time they tried to replace Coherent. That subsystem is trying to make a network connection and failing for some reason. Not clear why. CEF (and Coherent) are separate processes from GW2 that run on your system. with that being said, I need to wait until they find out whats wrong ? I mean its unfortunate but okay. THanks for help 🙂 Link to comment Share on other sites More sharing options...
mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 it says I have dx11, syill will not start 1 Link to comment Share on other sites More sharing options...
Sigpaos.2615 Posted April 18, 2023 Share Posted April 18, 2023 On 3/14/2023 at 12:05 PM, Rubi Bayer.8493 said: Hey everyone, I can confirm that people looking into a fix for this. In the meantime, a possible workaround is to add -usecoherent to your command line. The GW2 wiki has instructions on command line arguments if you're not familiar with this process. Some of you may be running into a separate problem. This does not apply to everyone in this thread, but please note that the game may not launch or work properly after we release a new build if you use a third-party program, due to possible incompatibilities. I have just experienced this issue for the very first time, and the -usecoherent flag resolved the crash. Thank you! 1 Link to comment Share on other sites More sharing options...
Chaba.5410 Posted April 18, 2023 Share Posted April 18, 2023 Just now, ArtExplosion.5806 said: with that being said, I need to wait until they find out whats wrong ? I mean its unfortunate but okay. THanks for help 🙂 I don't know. If you have the technical knowledge, you could inspect the network connections a process is trying to make to see why it's not able to connect. Most likely though it is some misconfiguration caused by the developer since that's what happened last time. Haha. Link to comment Share on other sites More sharing options...
Chaba.5410 Posted April 18, 2023 Share Posted April 18, 2023 (edited) 4 minutes ago, Sigpaos.2615 said: I have just experienced this issue for the very first time, and the -usecoherent flag resolved the crash. Thank you! Her statement mentions third-party programs. If that applies to you, try removing them first before using the workaround to see if the crash is being caused by them before determining if it's CEF. Edited April 18, 2023 by Chaba.5410 Link to comment Share on other sites More sharing options...
ArtExplosion.5806 Posted April 18, 2023 Share Posted April 18, 2023 1 minute ago, Chaba.5410 said: I don't know. If you have the technical knowledge, you could inspect the network connections a process is trying to make to see why it's not able to connect. Most likely though it is some misconfiguration caused by the developer since that's what happened last time. Haha. no i hav 0 knowledge of this so i hope they fixing it soonish..... but anyways thanks for informations 🙂 Link to comment Share on other sites More sharing options...
Neurion.4086 Posted April 18, 2023 Share Posted April 18, 2023 53 minutes ago, Kreiri.9048 said: well, good ol' -usecoherent launch flag works, so... Thankfully there are knowledgeable players... Thank you so much! Applying the command at the end of .exe worked for me. 1 Link to comment Share on other sites More sharing options...
Saniyah.1984 Posted April 18, 2023 Share Posted April 18, 2023 Chromium made it crashed again Link to comment Share on other sites More sharing options...
mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 updated drivers, updated VC, still says unable to initialize 3D output , please verify you have dx9, my system has dx11 Link to comment Share on other sites More sharing options...
Vegeta.2563 Posted April 18, 2023 Share Posted April 18, 2023 2 minutes ago, mezzer.4096 said: updated drivers, updated VC, still says unable to initialize 3D output , please verify you have dx9, my system has dx11 Try adding also -dx11 to shortcut along with -usecoherent Link to comment Share on other sites More sharing options...
daninumbers.4036 Posted April 18, 2023 Share Posted April 18, 2023 Just had that error after this last update. -usecoherent seems to be working and not crashing just clicking to log in. I had even tried to repair my client before I saw it did nothing lol. Link to comment Share on other sites More sharing options...
mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 Try adding also -dx11 to shortcut along with -usecoherent now says verify that you have dx11 dxdiag says I have dx11 and it is working Link to comment Share on other sites More sharing options...
mezzer.4096 Posted April 18, 2023 Share Posted April 18, 2023 put it back like it was or fix it 1 Link to comment Share on other sites More sharing options...
Trageran.5984 Posted April 18, 2023 Share Posted April 18, 2023 Once again they didn't test an update on Windows 7. been on almost 9 years and this is the second time for the Chromium Oops. Link to comment Share on other sites More sharing options...
Nazarick.9653 Posted April 18, 2023 Share Posted April 18, 2023 Same here...got the game working with -usecoherent, but framerate is choppier and the TP takes ages to respond... Link to comment Share on other sites More sharing options...
Irrational.2871 Posted April 18, 2023 Share Posted April 18, 2023 yeah that command allowed me to log in but trading post also crashed with the same error so guess no buying/selling for few days or weeks xd Link to comment Share on other sites More sharing options...
Altriba.8092 Posted April 18, 2023 Share Posted April 18, 2023 Same issue here, had to add -usecoherent to get into game. Link to comment Share on other sites More sharing options...
rune.9572 Posted April 18, 2023 Share Posted April 18, 2023 (edited) So for me, uh... Windows 11: game works, trading post randomly loads or not Windows 10: launcher crashes Windows 7: everything works 😂😂😂 Checked with 4 different accounts xd Edited April 18, 2023 by rune.9572 3 Link to comment Share on other sites More sharing options...
Vegeta.2563 Posted April 18, 2023 Share Posted April 18, 2023 Just now, rune.9572 said: Anet moment 😂 Windows 7: everything works 😂😂😂 If you run -usecoherent yeah.. otherwise client was instant crashing when hitting login lol 1 Link to comment Share on other sites More sharing options...
Vegeta.2563 Posted April 18, 2023 Share Posted April 18, 2023 57 minutes ago, mezzer.4096 said: Try adding also -dx11 to shortcut along with -usecoherent now says verify that you have dx11 dxdiag says I have dx11 and it is working You aren't running any addons correct? d912pxy, arcdps, reshade, or anything like that? Link to comment Share on other sites More sharing options...
Recommended Posts