Jmvars.4501 Posted September 5, 2023 Share Posted September 5, 2023 I have a brand new 7900 XT but I'm experiencing stutters in GW2, especially when moving my camera. I tried to enable V-Sync both in-game and in driver but this did not help, I tried limiting FPS to 60 which also did nothing. I previously had a 2070 Super that had no noticeable stutters on the exact same graphics settings. Any advice on what I can do? 1 1 1 Link to comment Share on other sites More sharing options...
Chaba.5410 Posted September 5, 2023 Share Posted September 5, 2023 Oh boy. You're going to spend a lot of time chasing this. For AMD cards, supposedly FreeSync can be a culprit. Link to comment Share on other sites More sharing options...
Kneitor.9367 Posted September 5, 2023 Share Posted September 5, 2023 (edited) 9 hours ago, Jmvars.4501 said: I have a brand new 7900 XT but I'm experiencing stutters in GW2, especially when moving my camera. I tried to enable V-Sync both in-game and in driver but this did not help, I tried limiting FPS to 60 which also did nothing. I previously had a 2070 Super that had no noticeable stutters on the exact same graphics settings. Any advice on what I can do? Just got an xtx myself, with initially the same issues, i enabled under the 'Gaming' tab in the Adrenaline dashboard , 'Anti-lag', few options down, set 'Wait for virtual refresh' (Off, unless aplication specifies) then below under Advanced tab 'Frame rate target control' and set it to 140, just below the 144hz of the monitor, so it doesnt overshoot. At the 'Display' tab, next to 'Gaming', 'Adaptive Sync Compatible' on, asuming you have a VRR compatible display, if not, use 'Radeon Enhanced Sync' under the previous mentioned 'Gaming' tab. Set the framrate in the GW2 settings itself to unlimited, disable v-sync. I use Windowed Fullscreen, in the settings, don't know if that matters. Edited September 5, 2023 by Kneitor.9367 3 Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted September 6, 2023 Author Share Posted September 6, 2023 (edited) 5 hours ago, Kneitor.9367 said: Just got an xtx myself, with initially the same issues, i enabled under the 'Gaming' tab in the Adrenaline dashboard , 'Anti-lag', few options down, set 'Wait for virtual refresh' (Off, unless aplication specifies) then below under Advanced tab 'Frame rate target control' and set it to 140, just below the 144hz of the monitor, so it doesnt overshoot. At the 'Display' tab, next to 'Gaming', 'Adaptive Sync Compatible' on, asuming you have a VRR compatible display, if not, use 'Radeon Enhanced Sync' under the previous mentioned 'Gaming' tab. Set the framrate in the GW2 settings itself to unlimited, disable v-sync. I use Windowed Fullscreen, in the settings, don't know if that matters. This did help reduce it by a meaningful amount but it still stutters. I can't enable "frame rate target control" per game unless I use Radeon Chill but that disables Anti-Lag. Anti-Lag seems to work better than Chill so I'll keep Anti-Lag on and Chill off and leave the fps uncapped. It's the latest version of Adrenalin. EDIT: So it turns out by lowering graphics settings slightly it almost completely stops stuttering in non-SOTO maps, it still stutters in SOTO maps but not nearly as much. Thanks for the help. Edited September 6, 2023 by Jmvars.4501 new information has come to light 3 1 Link to comment Share on other sites More sharing options...
Elinriel.3859 Posted September 7, 2023 Share Posted September 7, 2023 (edited) I own an RX 6900XT graphics card. AMD has issues with DX11 applications. The best solution I could find is DXVK(A translation layer for Direct3D 9/10/11 which allows running 3D applications on Vulkan API). DXVK also made loading maps faster.You will need: GW2 Addon Manager, DXVK 1. Download archive GW2-UOAOM-v1.4.5.zip link: GW2-UOAOM 2. Download the archive dxvk-2.3.tar.gz from the link: link: DXVK To extract a tar.gz archive, use 7-zip. Installation and configuration instructions: 1. Create a directory "addon_manager" in the game folder (..\Guild Wars 2\addon_manager\). 2. Copy the files from the GW2-UOAOM-v1.4.5.zip archive to the "addon_manager" folder. 3. Run the file GW2 Addon Manager.exe from the folder "addon_manager" (..\Guild Wars 2\addon_manager\). 4. In the "Add-Ons" menu, check the "libimgui" and "SelectRenderer" checkboxes. 5. Select the game directory (..\Guild Wars 2\). 6. Click on the "Update" button in the lower right corner, wait until the files are downloaded. 7. Close "GW2-UOAOM""GW2-UOAOM" downloaded some files and created a folder "addons" in the game folder (..\Guild Wars 2\addons\). 8. Go to the "dxvk" directory located in the "addons" folder (..\Guild Wars 2\addons\dxvk\) and copy the files from the dxvk-2.3.tar.gz archive into it. 9. Start the game as usual.If you did everything right you will see the render selection menu. Click on the "Change" button and select "DXVK" from the DX11 submenu. Click the "Apply" button and restart the game. Edited September 7, 2023 by Tiamat.2037 2 2 Link to comment Share on other sites More sharing options...
KrHome.1920 Posted September 8, 2023 Share Posted September 8, 2023 (edited) 7900 XTX user here: The game has stuttery camera movement, when it is not able to prerender frames. This is the case in CPU limited scenarios (= reander ahead queue (prerendered frames) is empty - something that happens VERY often in GW2 the faster your GPU is) when enabling Radeon Chill (= prerendered frames are disabled for that feature to work properly - this is btw. also the reason why you can't combine it with Anti Lag, since the latter manipulates the prerendered frames to reduce lag, which is pointless, when there are no prerendered frames - Chill already has the lowest possible input lag as long as you are in the frame cap of Chill - even AMDs brand new Anti Lag+ has higher input lag than Chill, Anti Lag is meant to reduce lag in GPU limited scenarios or when enabling VSync as both result in a lot of prerendered frames) You can achieve prerendered frames with the following settings (I've tesed them all and they all work for me in GW2) force VSync (at best via driver) and play in the VSync cap (once you drop below in GW2 this is mostly a CPU limit then => it will stutter in these sceanrios) cap your frames with FRTC in the driver (FRTC works different than Chill, it prerenders 1 frame to reduce stutter at the cost of input lag - you can combine it with Anti Lag to improve this a bit, but the lag will still be higher than with Chill) force a GPU limit (almost impossible with a 7900XT - you would have to run the game in 8K) Edited September 8, 2023 by KrHome.1920 1 Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted September 8, 2023 Author Share Posted September 8, 2023 2 hours ago, KrHome.1920 said: 7900 XTX user here: The game has stuttery camera movement, when it is not able to prerender frames. This is the case in CPU limited scenarios (= reander ahead queue (prerendered frames) is empty - something that happens VERY often in GW2 the faster your GPU is) when enabling Radeon Chill (= prerendered frames are disabled for that feature to work properly - this is btw. also the reason why you can't combine it with Anti Lag, since the latter manipulates the prerendered frames to reduce lag, which is pointless, when there are no prerendered frames - Chill already has the lowest possible input lag as long as you are in the frame cap of Chill - even AMDs brand new Anti Lag+ has higher input lag than Chill, Anti Lag is meant to reduce lag in GPU limited scenarios or when enabling VSync as both result in a lot of prerendered frames) You can achieve prerendered frames with the following settings (I've tesed them all and they all work for me in GW2) force VSync (at best via driver) and play in the VSync cap (once you drop below in GW2 this is mostly a CPU limit then => it will stutter in these sceanrios) cap your frames with FRTC in the driver (FRTC works different than Chill, it prerenders 1 frame to reduce stutter at the cost of input lag - you can combine it with Anti Lag to improve this a bit, but the lag will still be higher than with Chill) force a GPU limit (almost impossible with a 7900XT - you would have to run the game in 8K) Right now I'm limiting frames in driver by forcing VSync, this works fine for 98.7% of the game so I'm happy enough, at least the instanced content is stutter free now. Annoyingly FRTC doesn't allow limiting frames on a per game basis so I don't want to use that as I want certain games to push as many frames as they can. Thanks for your help. 1 Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted September 8, 2023 Author Share Posted September 8, 2023 14 hours ago, Tiamat.2037 said: I own an RX 6900XT graphics card. AMD has issues with DX11 applications. The best solution I could find is DXVK(A translation layer for Direct3D 9/10/11 which allows running 3D applications on Vulkan API). DXVK also made loading maps faster. You will need: GW2 Addon Manager, DXVK 1. Download archive GW2-UOAOM-v1.4.5.zip link: GW2-UOAOM 2. Download the archive dxvk-2.3.tar.gz from the link: link: DXVK To extract a tar.gz archive, use 7-zip. Installation and configuration instructions: 1. Create a directory "addon_manager" in the game folder (..\Guild Wars 2\addon_manager\). 2. Copy the files from the GW2-UOAOM-v1.4.5.zip archive to the "addon_manager" folder. 3. Run the file GW2 Addon Manager.exe from the folder "addon_manager" (..\Guild Wars 2\addon_manager\). 4. In the "Add-Ons" menu, check the "libimgui" and "SelectRenderer" checkboxes. 5. Select the game directory (..\Guild Wars 2\). 6. Click on the "Update" button in the lower right corner, wait until the files are downloaded. 7. Close "GW2-UOAOM" "GW2-UOAOM" downloaded some files and created a folder "addons" in the game folder (..\Guild Wars 2\addons\). 8. Go to the "dxvk" directory located in the "addons" folder (..\Guild Wars 2\addons\dxvk\) and copy the files from the dxvk-2.3.tar.gz archive into it. 9. Start the game as usual. If you did everything right you will see the render selection menu. Click on the "Change" button and select "DXVK" from the DX11 submenu. Click the "Apply" button and restart the game. I'll try this later, I already have UOAOM installed. Thanks for your help. 1 Link to comment Share on other sites More sharing options...
jokke.6239 Posted September 8, 2023 Share Posted September 8, 2023 Do you have an integrated graphics card? There's a chance the game is using that and not your dedicated GPU 1 1 1 Link to comment Share on other sites More sharing options...
Tony.8659 Posted September 16, 2023 Share Posted September 16, 2023 I guess this answers my question about AMD and DX11 issues. I was interested in the 7800 XT to replace my 3070, but I keep reading about AMD GPU's and issues with DX11 games. Looks like it's back to Nvidia, and probably the 4070 if the price drops some more. Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted September 20, 2023 Author Share Posted September 20, 2023 On 9/8/2023 at 2:48 PM, jokke.6239 said: Do you have an integrated graphics card? There's a chance the game is using that and not your dedicated GPU No. Apparently newer AMD GPU's don't play well with DX11. 1 Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted September 20, 2023 Author Share Posted September 20, 2023 On 9/16/2023 at 2:17 PM, Tony.8659 said: I guess this answers my question about AMD and DX11 issues. I was interested in the 7800 XT to replace my 3070, but I keep reading about AMD GPU's and issues with DX11 games. Looks like it's back to Nvidia, and probably the 4070 if the price drops some more. After I did the tweaking suggested here it no longer stutters anywhere except the new SotO maps for some reason, but it's much better there as well. All instanced content runs like butter now. 1 1 Link to comment Share on other sites More sharing options...
brakheart.1407 Posted October 2, 2023 Share Posted October 2, 2023 I just got a 6700 xt and am having the exact same problem. Glad to know it wasn't a me-problem. Still, i find it incredibly insane AMD would make products that have trouble running DX11 applications when my previous gtx 970 had no issue, ever. Link to comment Share on other sites More sharing options...
brakheart.1407 Posted October 2, 2023 Share Posted October 2, 2023 On 9/7/2023 at 10:52 PM, Tiamat.2037 said: I own an RX 6900XT graphics card. AMD has issues with DX11 applications. The best solution I could find is DXVK(A translation layer for Direct3D 9/10/11 which allows running 3D applications on Vulkan API). DXVK also made loading maps faster. You will need: GW2 Addon Manager, DXVK 1. Download archive GW2-UOAOM-v1.4.5.zip link: GW2-UOAOM 2. Download the archive dxvk-2.3.tar.gz from the link: link: DXVK To extract a tar.gz archive, use 7-zip. Installation and configuration instructions: 1. Create a directory "addon_manager" in the game folder (..\Guild Wars 2\addon_manager\). 2. Copy the files from the GW2-UOAOM-v1.4.5.zip archive to the "addon_manager" folder. 3. Run the file GW2 Addon Manager.exe from the folder "addon_manager" (..\Guild Wars 2\addon_manager\). 4. In the "Add-Ons" menu, check the "libimgui" and "SelectRenderer" checkboxes. 5. Select the game directory (..\Guild Wars 2\). 6. Click on the "Update" button in the lower right corner, wait until the files are downloaded. 7. Close "GW2-UOAOM" "GW2-UOAOM" downloaded some files and created a folder "addons" in the game folder (..\Guild Wars 2\addons\). 8. Go to the "dxvk" directory located in the "addons" folder (..\Guild Wars 2\addons\dxvk\) and copy the files from the dxvk-2.3.tar.gz archive into it. 9. Start the game as usual. If you did everything right you will see the render selection menu. Click on the "Change" button and select "DXVK" from the DX11 submenu. Click the "Apply" button and restart the game. "dxvk" directory wasn't created when i ran the manager and selected the boxes. Should i create the folder manually? Link to comment Share on other sites More sharing options...
Elinriel.3859 Posted October 3, 2023 Share Posted October 3, 2023 On 10/2/2023 at 9:07 PM, brakheart.1407 said: "dxvk" directory wasn't created when i ran the manager and selected the boxes. Should i create the folder manually? Yes, sorry I forgot that, you need to create the folder "dxvk" manually. Link to comment Share on other sites More sharing options...
Richie.3512 Posted October 3, 2023 Share Posted October 3, 2023 I have a 7900XTX and have had no issues with it out of the box running.at 3440 x 1440. In Adrenaline I use the Quality graphics profile with Radeon Anti-Lag and Anti-Lag+ set to enabled FreeSync Enabled It might be worth mentioning that I am running a full AMD system, CPU + GPU. using AMD Smart Access Memory (Resizable bar). You might want to check that you have this enabled. The gain you get in frame rate varies (between 1% - 16%) but it might help with the stability issue. Yes, I'm clutching at straws but any edge it might give you helps and you are also not leaving additional frames on the table. You might need to enable this in your bios settings as older motherboards have this set to off by default or you might need to update your mobo's bios to have the feature added. I'm not sure how AMD cards play with Intel mobos in regards to resizable bar. Link to comment Share on other sites More sharing options...
brakheart.1407 Posted October 17, 2023 Share Posted October 17, 2023 On 10/4/2023 at 12:45 AM, Richie.3512 said: I have a 7900XTX and have had no issues with it out of the box running.at 3440 x 1440. In Adrenaline I use the Quality graphics profile with Radeon Anti-Lag and Anti-Lag+ set to enabled FreeSync Enabled It might be worth mentioning that I am running a full AMD system, CPU + GPU. using AMD Smart Access Memory (Resizable bar). You might want to check that you have this enabled. The gain you get in frame rate varies (between 1% - 16%) but it might help with the stability issue. Yes, I'm clutching at straws but any edge it might give you helps and you are also not leaving additional frames on the table. You might need to enable this in your bios settings as older motherboards have this set to off by default or you might need to update your mobo's bios to have the feature added. I'm not sure how AMD cards play with Intel mobos in regards to resizable bar. I don't have ReBAR on my mobo, im running an x470 with a 3600 and a 6700 xt. I'm still getting issues with this gpu so I'll just return it and get a 3070. Have had my screen lose signal completely twice ready and i haven't had this gpu for more than a month, so it's clearly an amd-gw2 compatibility issue, since i haven't had any problems with other games. Link to comment Share on other sites More sharing options...
Richie.3512 Posted October 17, 2023 Share Posted October 17, 2023 Sorry to hear that, really sucks in this day and age. I hope you get back on the game soon 1 Link to comment Share on other sites More sharing options...
Jmvars.4501 Posted October 18, 2023 Author Share Posted October 18, 2023 On 10/4/2023 at 1:45 AM, Richie.3512 said: I have a 7900XTX and have had no issues with it out of the box running.at 3440 x 1440. In Adrenaline I use the Quality graphics profile with Radeon Anti-Lag and Anti-Lag+ set to enabled FreeSync Enabled It might be worth mentioning that I am running a full AMD system, CPU + GPU. using AMD Smart Access Memory (Resizable bar). You might want to check that you have this enabled. The gain you get in frame rate varies (between 1% - 16%) but it might help with the stability issue. Yes, I'm clutching at straws but any edge it might give you helps and you are also not leaving additional frames on the table. You might need to enable this in your bios settings as older motherboards have this set to off by default or you might need to update your mobo's bios to have the feature added. I'm not sure how AMD cards play with Intel mobos in regards to resizable bar. I also have a full AMD system. I did some tweaking of various things suggested in this thread and it got much better in non-SotO maps. After my CPU upgrade even SotO maps improved although I was expecting the opposite. Link to comment Share on other sites More sharing options...
Gadzooks.4687 Posted October 19, 2023 Share Posted October 19, 2023 Just a tip If you have steam running in the background, close it if you can. I found that steam running seems to add an odd lagginess to the game Link to comment Share on other sites More sharing options...
DeWolfe.2174 Posted October 19, 2023 Share Posted October 19, 2023 (edited) Bought an AMD Radeon RX 6650XT and it stutters too. Had zero stuttering on my Nvidia 2060. I used DDU to uninstall previous drivers in windows safe mode. Then let windows install only the drivers. Seems to have cleared up a lot of the stutter. Looking for an Nvidia card again while still within the return windows on the AMD card. Editing to add that I bought an Nvidia 4060 and the stutter is entirely gone and games running clean. It's a shame the AMD card wasn't working correctly with GW2. Edited October 21, 2023 by DeWolfe.2174 new information Link to comment Share on other sites More sharing options...
xDumplinx.7983 Posted October 27, 2023 Share Posted October 27, 2023 7800x3d and 7900xtx here, playing at 4k and havent had a single stutter, even in the horrible boon ball junk of wvw. Have you tried playing with image sharpening, anti-lag, and enhanced sync off? You could even use lower quality scaling instead of native. Link to comment Share on other sites More sharing options...
Trimlys.7091 Posted November 4, 2023 Share Posted November 4, 2023 My 7900xtx worked just fine before that big patch at the end of September, like smooth has butter with high fps 3 way blop in wvw and was smooth. now i get 20 fps and all kind of texture glitch turning all my graphic black. Link to comment Share on other sites More sharing options...
Coffeelake.7924 Posted January 17 Share Posted January 17 Anyone having performance issues with the rx 7900 or rx7800xt in Guildwars 2 there is a fix. Most easy one for me atleast fixed everything. Intal driver : 23:11:1 instead of 23:12 the last available driver gave me issues in several games. I just did DDU and after installed the old driver and vwualaaaaaa. In four days a new driver wil come so ill try it for sure but hope it works decent. Link to comment Share on other sites More sharing options...
KrHome.1920 Posted January 18 Share Posted January 18 12 hours ago, Coffeelake.7924 said: Anyone having performance issues with the rx 7900 or rx7800xt in Guildwars 2 there is a fix. Most easy one for me atleast fixed everything. Intal driver : 23:11:1 instead of 23:12 the last available driver gave me issues in several games. I just did DDU and after installed the old driver and vwualaaaaaa. In four days a new driver wil come so ill try it for sure but hope it works decent. Before people start wasting their time with a driver wipe for no reason: The post above me most likely describes an individual issue. The 23.12.1 does not have any changes that would cause stutter problems in GW2. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now