Dracomet.3648 Posted October 26, 2021 Share Posted October 26, 2021 Engie saying “Rocket Punch” whilst doing something literally anything other than a rocket punch. Link to comment Share on other sites More sharing options...
nucklepuckk.1805 Posted October 26, 2021 Share Posted October 26, 2021 If I fire Jade Cannon and queue any other golem skill, Jade Cannon is interrupted and the other skill doesn't come out. 1 Link to comment Share on other sites More sharing options...
Harak.8397 Posted October 26, 2021 Share Posted October 26, 2021 I'm not sure I was supposed to be able to solo Steve in the Lab. He got the jump on me and at first it was going as you would expect. Then the mech got proper aggro and sort of stop taking damage for a good long while, I could stand back and plink at the Horror without issue with minimal condi damage ( that was being healed by the signet ) Eventually, more people showed up, mesmers, standing next to me who actually got downed by the aoe torment while I remained mostly unaffected. The mech eventually resumed taking damage and died but you could tell something was off. Link to comment Share on other sites More sharing options...
TexZero.7910 Posted October 26, 2021 Share Posted October 26, 2021 1 hour ago, Perceptor.7189 said: This happend while trying the meca on the champion golem in the fractal lobby, but when the jade golem dies, if you are quick enough for cast him barrier and then you cast f skill, the golem stay in the fight instead with perma invuln. Can confirm but i achieved this through a slightly different method which i believe is two seperate bugs. 1. You mech can interrupt it's recall state (via death or cast) by using any of the Function Skills or Signets 2. If your mech would be dead and recalling and you do this it becomes invulnerable. Another not quite right interaction possibly a bug is that the mech will ignore some map geometery like barriers and can teleport via the F1 skill to targets that would otherwise be unreachable. 1 Link to comment Share on other sites More sharing options...
Lynx.9058 Posted October 26, 2021 Share Posted October 26, 2021 As mentioned, mech name doesn't stay if it's resummoned or traits are changed or you go to a different zone. With the top traits in the mechanist line (condi damage traits), the mech's "melee" attack isn't really melee, it attacks from a small distance away, which wouldn't be a problem except it puts the mech out of range for the radius of the F2 attack and the aoe condi damage signet (forget the name, the one that pulses damage around the mech when active). The mech is not spawnable underwater, and has no effect underwater. This really puts the mechanist in a crippled state for any underwater content. Please give the mech a submerged mode! Tool kit 1 still only repairs turrets, not the mech. That's probably just an oversight, but could it be fixed? Nobody uses tool kit anyways, and it'd be nice to have for condi builds if it could also repair the mech. Link to comment Share on other sites More sharing options...
das Keks.5403 Posted October 26, 2021 Share Posted October 26, 2021 (edited) 37 minutes ago, rune.9572 said: Enemy golems are invulnerable in WvW XD Noticed the same. If the Mecha dies it get the "Determined" buff and is invulnerable while flying away. If you then recall the Mecha you interrupt the flying away and end up with a perfectly fine "Determined" and invulnerable Mecha. Maybe this should be fixed even before end of the beta to prevent exploitation. EDIT: Ah I see others reported that as well. Edited October 26, 2021 by das Keks.5403 1 Link to comment Share on other sites More sharing options...
ejax.5170 Posted October 26, 2021 Share Posted October 26, 2021 Not sure if intended, but in open world my mech has ~46k health but in WvW (using same player gear and traits, mind you) my mech has only 27k health. Doesn't seem to make much sense, because you would expect the mech to take more dmg in PvP-oriented content. Link to comment Share on other sites More sharing options...
david r.3947 Posted October 26, 2021 Share Posted October 26, 2021 (edited) 1 hour ago, das Keks.5403 said: If the Mecha dies it get the "Determined" buff and is invulnerable while flying away. If you then recall the Mecha you interrupt the flying away and end up with a perfectly fine "Determined" and invulnerable Mecha. Having run through the story mode of Caudecus' Manor, I noticed that this also happens if you command the Jade Mech to perform a special attack as it's trying to fly away. Coupled with the absurd damage that thing innately deals, I was able to solo Champions with little effort. This is made even worse if you die, because there's a brief 1-2 second window where the mech keeps fighting. If you use a waypoint before then, the golem remains out(maybe still Invulnerable from the above bug) and you can keep the fight going as you sort your inventory a hundred or so feet away. Edited October 26, 2021 by david r.3947 Also wanted to point out just how high the innate stat conversions are for the traits. That must've also contributed to the Jade Mech's crazy damage. Link to comment Share on other sites More sharing options...
DragoTheWise.7256 Posted October 26, 2021 Share Posted October 26, 2021 5 hours ago, GrayHawk.7560 said: It looks like the Tools minor Mechanised Deployment isn't affecting the Mech Command skills but the majors affect them as if they were tool belt skills. Is this a bug or intended? If intended then it's a totally dead trait on Mechanist. I took a look at this and the minor is applying to the F skills. No bug on my end. CDs are below With Tool Line: F1 abilities: Rolling Smash- 17s Explosive Knuckle- 12.75s Spark Revolver- 17s F2 abilities: Discharge Array- 25.5s Crisis Zone- 34s Core Reactor Shot- 21.25s F3 abilities: Jade Mortar- 17s Barrier Burst- 25.5s Sky Circus- 25.5s Without Tool Line: F1 abilities: Rolling Smash- 20s Explosive Knuckle- 15s Spark Revolver- 20s F2 abilities: Discharge Array- 30s Crisis Zone- 40s Core Reactor Shot- 25s F3 abilities: Jade Mortar- 20s Barrier Burst- 30s Sky Circus- 30s Link to comment Share on other sites More sharing options...
GrayHawk.7560 Posted October 26, 2021 Share Posted October 26, 2021 21 minutes ago, DragoTheWise.7256 said: I took a look at this and the minor is applying to the F skills. No bug on my end. CDs are below With Tool Line: F1 abilities: Rolling Smash- 17s Explosive Knuckle- 12.75s Spark Revolver- 17s F2 abilities: Discharge Array- 25.5s Crisis Zone- 34s Core Reactor Shot- 21.25s F3 abilities: Jade Mortar- 17s Barrier Burst- 25.5s Sky Circus- 25.5s Without Tool Line: F1 abilities: Rolling Smash- 20s Explosive Knuckle- 15s Spark Revolver- 20s F2 abilities: Discharge Array- 30s Crisis Zone- 40s Core Reactor Shot- 25s F3 abilities: Jade Mortar- 20s Barrier Burst- 30s Sky Circus- 30s Yeh seems to have been fixed my side as well thankfully, allowed me to get my build going. Will delete the bug post. 1 Link to comment Share on other sites More sharing options...
AquaBR.9250 Posted October 26, 2021 Share Posted October 26, 2021 The mecha is all over the place. even with the ranged attacks it keeps running into zergs in wvw and dying, move the skills to the side and make an F1 where we can command it to attack or go back to you, i have to run the teleport signet to call it back everytime. Jade Mortar skill is buggy as hell, the jade just shoots at the direction it is facing independent of if im targeting someone or not, if should shot the thing where my target (from action camera) is targeting, like auto attacks 1 Link to comment Share on other sites More sharing options...
rune.9572 Posted October 26, 2021 Share Posted October 26, 2021 (edited) Golem gives infinite duration might stacks if you stand on top of it when it attacks https://i.imgur.com/ZTSOWB6.png Edited October 26, 2021 by rune.9572 1 Link to comment Share on other sites More sharing options...
AquaBR.9250 Posted October 26, 2021 Share Posted October 26, 2021 My mecha keeps summoning itself in and out without me commanding it to 1 Link to comment Share on other sites More sharing options...
ZEUStiger.3590 Posted October 27, 2021 Share Posted October 27, 2021 "Mechanist" training line in the Training tab is positioned between Scrapper and Holosmith for some reason, instead of being the last one in the list. Same issue affects the v2/professions API. Link to comment Share on other sites More sharing options...
ShadowElf.1975 Posted October 27, 2021 Share Posted October 27, 2021 (edited) Standing next to my Mech atacking continuesly he gets ~11 stacks of might while im only at ~5. Jade Siphon boosts it up to 14 migh but it runs out before he does it again. Build and Stuff: Alchemy: 3-3-1 Inventions: 1-1-3 Mechanist: 2-2-2 All Harrier Legendary (Except Mace, Amulet, 1 Ring -> Harrier Exotic from Beta Chests) Superior Rune of Scourge x6 Superior Sigil of Force + No Sigil in Shield Edit: I just realised that im loosing some stacks of might way before the 17seconds mark. Tooltip says the duration is 17s) Edited October 27, 2021 by ShadowElf.1975 More Information Link to comment Share on other sites More sharing options...
Ruufio.1496 Posted October 27, 2021 Share Posted October 27, 2021 Snap Ground Targeting does not work for any of the mechanist ground target abilities, nor does it work for any of the other new class abilities. Link to comment Share on other sites More sharing options...
Ruufio.1496 Posted October 27, 2021 Share Posted October 27, 2021 4 hours ago, AquaBR.9250 said: The mecha is all over the place. even with the ranged attacks it keeps running into zergs in wvw and dying, move the skills to the side and make an F1 where we can command it to attack or go back to you, i have to run the teleport signet to call it back everytime. Jade Mortar skill is buggy as hell, the jade just shoots at the direction it is facing independent of if im targeting someone or not, if should shot the thing where my target (from action camera) is targeting, like auto attacks Yep. Action Camera has many issues like this and thank god for this bug thread started by a dev because I've made posts for years about action camera. Certain skills in the game think you don't have a target when you in fact do but will not go off or will not work properly unless your reticule is aimed right on the target. Other skills work just fine, but some skills don't and I'm not sure why? Some of the skills that work bad with action camera: Ghastly Claws - It will say you have no target selected if your reticule isn't close to the target. Deaths Charge - Will charge towards the general direction of the target selected but not right to it if reticule isn't right on the target. Many skills have this problem with action camera. Please fix it already PLEASE. Link to comment Share on other sites More sharing options...
Logan.3840 Posted October 27, 2021 Share Posted October 27, 2021 Bug: Jade Mech pet name. This has already been mentioned, but there seems to be an issue with the naming of the Jade Mech. I like that I can change its name to like how Zojja has Mr. Sparkles or Taimi & Scruffy, but the name change does not appear to last. It will stay for the battle, but reverts back to default if I mount, glide, or stow the mech, go underwater, etc.. Hoping the name I assign can stick around throughout instead of having to redo the name every few minutes. Link to comment Share on other sites More sharing options...
Terek.8923 Posted October 27, 2021 Share Posted October 27, 2021 Quote -Name of pet resets every time you summon it. -in Auric basin, my golem decided to attack one of the invincible worms on the west side of the map and i could not get him to attack any other target until the invincible aura was removed from the worm. -in Fractal 24, first boss, the golems will remain in the center and not follow the player through the jump updrafts. -pathing actually appears to be worse than ranger pets Link to comment Share on other sites More sharing options...
Kazeshini.8210 Posted October 27, 2021 Share Posted October 27, 2021 When I summon the jade golem on top of enemy mobs they do not do damage on impact/spawn when they land if I happened to press W to move forward or cancel animation. Link to comment Share on other sites More sharing options...
Aothix.3624 Posted October 27, 2021 Share Posted October 27, 2021 1. Cooldown timers missing on F1 and F3 2. Animation lock during F1 and F2 maybe 50% of the time 3. When dismounting, mech resummons in a random location on screen, sometimes far behind 4. Mech summons if Crash Down is available when mining, gathering or harvesting and interrupting channel 5. Tool trait line minors seem to affect Mech, but majors seem to be hit and miss Link to comment Share on other sites More sharing options...
Dahkeus.8243 Posted October 27, 2021 Share Posted October 27, 2021 There seems to be an issue with de-summoning the mech in combat. Twice I have de-summoned it when it’s health got close to about 20% and when I did the following occurred: For a moment the long cool down from when the mech dies was displayed, but then the 10 second cool down for de-summoning over-wrote that. When this 10 second cool down finished, the skill flipped back to the full, long death cooldown. I don’t recall if the mech technically died when it was in the process of blasting off, but I don’t think it did. Link to comment Share on other sites More sharing options...
Stalima.5490 Posted October 27, 2021 Share Posted October 27, 2021 (edited) The elite signet doesn't seem to detail what the active effect does with the laser Edited October 27, 2021 by Stalima.5490 Link to comment Share on other sites More sharing options...
Raolin Soulherder.3195 Posted October 27, 2021 Share Posted October 27, 2021 1. I had the mech set on 'passive' and it was sitting beside me as we watched some server-mates fighting enemies in front of us on the bridge by Lowlands Keep. I used the "Crisis Zone" skill and the mech started running forward far ahead into the scrum, even though I hadn't moved and I didn't have any enemies or allies targeted. 2. I jumped down off the Stonemist Castle inner-wall to engage some enemies below but the mech didn't follow. You have to be very far from the wall for the mech auto-port to you. So if the enemy stays near the wall and you jump down to fight, you will be fighting by yourself as the mech watches from above. 3. Certain areas, the mech can't traverse, such as the little step you can hop up on the cliff that is between Klovan and Stonemist. The mech will not auto-port to you either once you're up there. Furthermore, if you try to use the shadowstep from Shift Signet while you're up on that plateau, it will not work at all (neither for yourself nor for your mech) since your mech doesn't have a path there. Even if you de-spawn the mech, you can't use the shadowstep while up on that hill. I am unsure if this is intended or not. Do other professions' shadowsteps work once you have hopped up on that plateau? Link to comment Share on other sites More sharing options...
Raolin Soulherder.3195 Posted October 27, 2021 Share Posted October 27, 2021 Additionally, Mechanized Deployment (15% recharge reduction on tool belt skills), from the Tools traitline, does not work in WvW, though it does work in PvE. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now